When it comes to updating the look of your windows, blinds fitting is a popular choice. Blinds not only add style to a room, but they also provide privacy, light control, and insulation. However, choosing the right blinds and ensuring they are properly fitted can be a daunting task. In this guide, we will walk you through everything you need to know about blinds fitting.
Types of Blinds
There are several types of blinds to choose from, each with its own set of features and benefits. The most common types of blinds include:
1. Venetian Blinds – Venetian blinds are made up of horizontal slats that can be tilted to control the amount of light entering a room. They are available in a variety of materials, including wood, aluminum, and faux wood.
2. Roller Blinds – Roller blinds consist of a single piece of fabric that can be rolled up or down to cover the window. They are simple to operate and come in a wide range of colors and patterns.
3. Vertical Blinds – Vertical blinds have slats that hang vertically and can be tilted to control the light. They are often used for large windows or sliding doors.
4. Roman Blinds – Roman blinds are made of a single piece of fabric that folds up into neat horizontal pleats when raised. They provide a more decorative look compared to other types of blinds.
Measuring for Blinds
Before you can start fitting your blinds, you need to accurately measure your windows. Here’s how to do it:
1. Measure the width of your window at the top, middle, and bottom. Use the smallest measurement to ensure your blinds fit properly.
2. Measure the height of your window on the left, right, and center. Again, use the smallest measurement.
3. If you are fitting inside the window frame, deduct a small amount (usually around 3mm) from your width and height measurements to allow your blinds to fit neatly inside.
Fitting Your Blinds
Once you have your blinds and measurements ready, it’s time to start fitting them. Here’s a step-by-step guide to help you through the process:
1. Assemble your blinds according to the manufacturer’s instructions.
2. If you are fitting inside the window frame, attach the brackets provided with your blinds to the top of the window frame. Make sure they are level and evenly spaced.
3. If you are fitting outside the window frame, attach the brackets to the wall above the window. Use a spirit level to ensure they are straight.
4. Once the brackets are in place, lift your blinds into position and secure them to the brackets. Make sure they are secure and level.
5. Test your blinds by opening and closing them to ensure they operate smoothly.
Common blinds fitting Mistakes to Avoid
While fitting blinds may seem straightforward, there are a few common mistakes to avoid to ensure a perfect fit:
1. Incorrect measurements – Always double-check your measurements before ordering your blinds to avoid any fitting issues.
2. Not using a spirit level – A wonky set of blinds can ruin the look of your windows. Always use a spirit level to ensure your brackets are straight.
3. Over-tightening screws – Over-tightening screws can cause damage to your blinds or window frame. Tighten them just enough to secure your blinds in place.
4. Rushing the process – Take your time when fitting your blinds to ensure they are installed correctly the first time.
Conclusion
Blinds fitting is a great way to update the look of your windows while providing practical benefits such as privacy and light control. By choosing the right type of blinds, measuring accurately, and following the fitting instructions carefully, you can easily transform the look of any room. Remember to avoid common fitting mistakes to ensure a flawless finish. Now that you have all the information you need, it’s time to start fitting your blinds and enjoy the new look of your windows.